Computerized ICE Plant Trainer

Computerized ICE Plant Trainer

Standard :

Model No. : HI MRA-009
The ?HANSA? This training unit allow students to investigate air conditioning at a basic level. Students can use P-H charts and psychometric charts for their calculations and discover the enthalpy change.

The unit features an air-cooled condenser unit connected to an evaporator located in an air duct. The air duct contains relative humidity and temperature sensors on both sides of the evaporator. A small fan provides airflow down the duct and can be manually adjusted.


Description

The ?HANSA? This training unit allow students to investigate air conditioning at a basic level. Students can use P-H charts and psychometric charts for their calculations and discover the enthalpy change.

The unit features an air-cooled condenser unit connected to an evaporator located in an air duct. The air duct contains relative humidity and temperature sensors on both sides of the evaporator. A small fan provides airflow down the duct and can be manually adjusted.

The refrigeration circuit features high and low pressure gauges, a pressure switch, sight glass, filter dryer and TEV valve. The circuit also includes pressure transducers that connect to the instrumentation.

Sensors record the air temperature and air humidity before and after each stage as well as the pressures and temperatures of the refrigerant. The flow rate of the refrigerant is determined by means of the pressure measurement. The measured values can be read on digital displays. At the same time, the measured values can also be transmitted directly to a PC via USB. The data acquisition software is included.

Steam humidifier
Power consumption: 4kW

Steam capacity: 5,5kg/h, switchable in three stages

Fan
Power consumption: 167W

Max. Volumetric flow rate: 1150m3/h

Speed: 1000?2600min-1

Pmax: 460Pa

Air preheater: 1kW, switchable in two stages
Air reheater: 2kW, switchable in two stages
Air duct, WxH: 300x350mm
Direct evaporator as air cooler: 6kW
Condensing unit
Power consumption: 968W at 5/25?C

Refrigeration capacity: 2,3kW at 5/25?C

Refrigerant: Refrigerant: R134a/22/etc
Filling volume: 3,3kg

CO2-equivalent: 2,1t

Measuring ranges
Differential pressure: 0?100Pa

Temperature: 5x 0?50?C, 4x -100?200?C

Humidity: 5x 10?90%

Pressure: -1?15bar, -1?24bar (refrigerant)

Flow rate: 8?102L/h (refrigerant)

Required for operation
230V, 50Hz, 1 phase
230V, 60Hz, 1 phase

DIMENSIONS AND WEIGHT

L x W x H (approx.): 1600 x 800 x 1500 mm
Weight (approx.): 230 kg

Learn to use Psychometric charts
Determine enthalpy change in the airflow
Learn to use a Pressure-Enthalpy chart
Determine superheat and sub-cooling
Determine Coefficient of Performance (COP)
Determine isentropic and non-isentropic efficiencies of compression stage
Investigate the effect of air flow rate on COP

Few of Our

Eminent Clients

Enquiry Now

    has been added to your cart:
    Checkout