Actual Cut-Section Working Four Wheeler 4 Stroke Diesel CRDI Demonstration Chasis With Electricals Of A Hyundai Accent Vehicle Front Wheel Drive
The model is made out of a full-size original used Hyundai accent chassis consisting of the four-stroke 4 cylinder CRDi DIESEL engine. The cut section model is constructed such that all the following systems can be demonstrated in working conditions.
The model is made out of a full-size original used Diesel car chassis. The cut section model is constructed such that all the following systems can be demonstrated in working conditions.
ENGINE:
Maximum parts and accessories of an engine like cylinders, cylinder head, Inlet and Exhaust manifolds, Fuel system, Lubrication system, cooling system, self-starter, Alternator, etc, are sectioned to show the internal constructional details.
This complete sectioned model is coupled with a 220/230V A.C single phase Motor through a Reduction drive unit. By running the motor the complete working details of the individual parts, different mechanisms can be demonstrated as the model is running at a very low speed (about 15 to 20 rpm).
TRANSMISSION SYSTEM:
It consists of a Clutch and gearbox assembly, the casing of which is suitably cut to demonstrate its operation. The Hydraulic/Mechanical circuit from the pedal to the Clutch is active and will help to demonstrate the response of clutch systems. The gearbox is coupled to a Differential gearbox with an axle and the different coupling used for this transmission can be demonstrated. The Differential gearbox is also cut so as to clearly demonstrate its complete operating principle. The gear shifting including the forward and reverse gear operation can be clearly shown. The speed variation and the rotation of the Differential gearbox can be seen while gear shifting.
FUEL SYSTEM:
The components related to the fuel system will be suitably sectioned and made working to explain the internal details of the system.
EXHAUST SYSTEM:
It consists of Exhaust Manifold and silencer in cut section to explain internal construction.
LUBRICATION SYSTEM:
It consists of the engine Lubrication system along with the Lubrication oil pump.
SUSPENSION SYSTEM:
This will explain both the front and rear suspension systems along with necessary linkages etc., The construction and internal details can be explained using the same.
BRAKING SYSTEM:
This Mechanical/Hydraulic/Air circuit of the Braking mechanism is suitably sectioned to show the internal constructional details. The principle of Pedal braking and hand braking can be explained.
(Only the Hydraulic Braking circuit will be made work.)
STEERING MECHANISM:
This can be seen and included in the Steering wheel, steering gear, and coupling at the wheels.
ELECTRICAL SYSTEM:
The Electrical system gives a complete idea of the electrical system and circuit of a vehicle. It has been provided with Sectionised battery and terminals are provided to connect another working battery to show the working of the individual parts and accessories such as a Sectionised Self-starter, Alternator, Wiper Motor, Horn relay, etc., and working of the headlight Brake light, side indicator, Horn, parking lights, etc.
